Acrylic Technologies Australia

Acri-Bond 204

$64.90

Acri-Bond 204 is a versatile 2 Part Methyl Methacrylate Adhesive (MMA) which can bond many different materials. Such as most plastics including acrylic (PMMA), ABS, Poly Carbonate, PVC, Aluminium and Steel, Carbon Fibre, Epoxy Fibreglass Reinforced Plastic, Glass and Wood. It has a very strong bond to many of the materials listed and has a crystal clear appearance. Acri-Bond 204 is the perfect glue for letter fabrication, aquarium building, sign fabrication, filling cracks, plastic fabrication that requires a strong bond or sealing, any bonding that requires the use of two different substrates.

Out of stock

Description

Acri-Bond 204 is a versatile 2 Part Methyl Methacrylate Adhesive (MMA) which can bond many different materials. Such as most plastics including acrylic (PMMA), ABS, Poly Carbonate, PVC, Aluminium and Steel, Carbon Fibre, Epoxy Fibreglass Reinforced Plastic, Glass and Wood. It has a very strong bond to many of the materials listed and has a crystal clear appearance. Acri-Bond 204 is the perfect glue for letter fabrication, aquarium building, sign fabrication, filling cracks, plastic fabrication that requires a strong bond or sealing, any bonding that requires the use of two different substrates.

Acribond 204 or 205?

Acri-Bond 204 and Acri-Bond 205 have the same properties and bond the same substrates the only difference is the speed of the cure.

Acri-bond 204 takes about 3-4min to cure whilst Acri-Bond 205 takes about 6-8 min. Both take 24 hours to fully cure however choose which fixture speed you would prefer to work with and what suits your jobs better. If you have any questions feel free to contact us and we will be more than happy to help!

 

Instructions

Use a static mixer nozzle to accurately mix the contents of the 1:1 cartridge. Each cartridge includes one Static Mixer Nozzle Green 1:1, and you can purchase more in 10 packs from our store.

 

You will also require a 1:1 Static Mixing Dispenser to push the contents through the static mixer. This is the best way to apply it and get accurate, dependable results every time.

 

Parts to be joined should fit without forcing and be clean, it is recommended to use Acri-Bond Cleaner prior to applying any product to remove any dust and dirt. It is important to let out any air bubbles by dispensing the first part of the cartridge onto some paper until the bubbles are gone. Apply adhesive directly from the static mixer or with a syringe and either 0.8mm or 1.4mm Blunt Needles and assemble while parts are still wet.

 

If any bubbles arise use a small toothpick or metal pick to pop them before moving to the next step, although most bubbles will disappear when the chemical reaction is complete. Press parts together in firm contact and use a clamp to secure while the glue goes off. Acri-Bond 205 will achieve a working strength within 15min and full cure strength within 24 hours. You have approximately 3-4 minutes to work with the glue before it starts to set off.

 

Please check the TDS for material suitability and strength of each bond. For a tutorial how to use please refer to our YouTube Chanel or in the Videos tab above.

 

MSDS/TDS

Videos

You may also like…

0