Description
Quixx Paint Scratch Remover – Say Goodbye to Scratches in Minutes!
Scratches happen—whether it’s a shopping cart, a stray zipper, nail marks behind the door handle or a minor paint transfer, they can quickly take the shine and value off your car. But with Quixx Paint Scratch Remover, you can take care of them yourself—quickly, easily, and effectively. Suitable for all glossy and metallic finishes, it reliably removes small to medium scratches and scuff marks, restoring your paint to a like-new condition. Trusted and Dekra-certified for proven performance, Quixx puts professional results in your hands—no stress, no expensive repairs.
Product details:
- 2 component system with an abrasive compound paste (Repair no.1 ) and special finishing polish (Finish no.2 ).
- Simple, fast and effective application in two-three steps depending on the scratch.
- Enhanced efficacy through Plastic Deformation Technology (PDT)
- Professional quality results.
- Avoids expensive repairs and increases value of your car.
- Let’s get started: The all-inclusive kit contains all the utensils you need for making repairs.
What’s in the Box?
- Repair No.1 (compound)
- Finish No.2 (polish)
- professional polishing cloths
- 3000 grit sandpaper for deeper scratches
Application
1) First decontaminate the area that you will be treating. We recommend using a 1:10 mix of dishwasher liquid to warm water to degrease the surface. This will help get the best results as it will remove most of the surface contaminants.
2) Apply masking tape around the scratch, leaving a 5-8cm margin on all sides as it is important to focus in the area and not stray too far from the damage being repaired.
3) This step depends on the severity of the damage. If the scratch is deeper but still within clear coat you will need to sand with the 3000 grit sand paper. Dip the sandpaper into some water. Always sand in the opposite direction of the scratch to avoid deepening the mark. Do this until the scratch is no longer visible.
4) Apply Quixx Repair Compound (No. 1) to the scratched area and polish it for about 1-2 minutes using the special polishing cloth or a clean cotton cloth in the opposite direction to the scratch and apply pressure to effectively fix. Remove residues with a damp cloth.
5) Remove the tape and polish the worked areas and any matt patches with Quixx Finish Polish (No. 2) for a mirror finish. Make sure to go past the area that was worked in steps 3 and 4 so you can effectively blend the worked area. This will make your repair seamless!
