ACRI-BOND MASKREM

Contains

Kerosine (petroleum), hydrodesulfurized NCAD

Instructions

Apply liberally over masking tape or residue to be removed. Leave until soaked and than scrap or remove paper or tape. To remove remaining residue apply to a clean cleaning cloth and wipe gently. Change cloth sides to avoid scratching the surface. If scratched use XERAPOL® scratch removal. Use ACRI-BOND CLEANER and BRILLIANIZE® antistatic polisher for finishing touches.

Recommended use

This cleaner has been designed for cleaning of Acrylic. It shows good results with other plastic materials such as Polycarb, ABS and HIPS. Test before use.

Warranty

This product is intended for use by skilled individuals at their own risk. Since specific use, materials and handling is not controlled by ATA, our warranty is limited to the replacement of defective products only.

Risk - R40, 65, 66

The chemical used for this product is classified as hazardous according to the criteria of NOHSC, and not classified as Dangerous Goods according to the Australian Dangerous Goods Code. Limited evidence of carcinogenic effect. Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking.

Safety - S23, 24 62, 36/37

Keep container in a well-ventilated place. Do not breathe vapour. Adequate ventilation to control airborne concentrations. Avoid release to the environment. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.

First Aid

Remove to fresh air. If rapid recovery does not occur, transport to nearest medical facility for additional treatment. Remove contaminated clothing. Flush exposed area with water. If swallowed, do not induce vomiting

Spills/leaks

Recover or recycle if possible. Drain container thoroughly. After draining, vent in a safe place away from sparks and fire. Allow residues to evaporate or soak up with an appropriate absorbent material and dispose of safely. Remove contaminated soil and dispose of safely.

Fire

Carbon monoxide may be evolved if incomplete combustion occurs. Use foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. Do not use water in a jet.